Sony SDM-P234 Computer Monitor User Manual


 
25
GB
Specifications
LCD panel
Panel type: a-Si TFT Active Matrix
Picture size:23 inch (58.4 cm)
Input signal format
RGB operating frequency*
Horizontal:28–92 kHz (analog RGB)
28–75 kHz (digital RGB)
Vertical:48–85 Hz (analog RGB)
60 Hz (digital RGB)
Resolution
Horizontal: Max.1920 dots (Only when the vertical
frequency is set to 60 Hz, the horizontal resolution is 1600
dots or more.)
Vertical: Max.1200 lines (Only when the vertical frequency
is set to 60 Hz, the vertical resolution is fixed to 1200 lines.)
Input signal levels
Analog RGB video signal:
0.7 Vp-p, 75 , positive
SYNC signal:
TTL level, 2.2 k, positive or negative (Separate
horizontal and vertical, or composite sync)
0.3 Vp-p, 75 , negative (Sync on green)
Digital RGB (DVI) signal: TMDS (Single link)
Audio input
Stereo minijack, 0.5 Vrms
Audio output
Stereo minijack
Power requirements
100–240 V, 50–60 Hz, Max. 1.0 A
Power consumption
Max. 80 W
Operating temperature
5–35
°C
Dimensions (width/height/depth)
Display (upright):
Approx. 534
×
429
×
250 mm
(with stand)
(21
1
/8 × 17 × 9
7
/8 inches)
Approx. 534 × 352 × 110.5 mm (without stand)
(21
1
/8 × 13
7
/8 × 4 inches)
Mass
Approx. 9.7 kg (21 lb 6 oz) (with stand)
Approx. 7.5 kg (16 lb 9 oz) (without stand)
Plug & Play
DDC2B
Accessories
See page 7.
* Recommended horizontal and vertical timing condition
Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
Horizontal blanking width should be more than 2.5 µsec.
Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.