Filter
Top Products
VPL-CS10/CX10
4-079-300-12 (2)
D:\Nouhin\W00001VPL-
CS10CX10\4079300122\4079300122VPLCS10CX10WW\02GB-
VPLCS10.CX10WW\03OVR.fm
masterpage:Left
GB
10
Location and Function of Controls
qd
qdqd
qd Security lock
Connects to an optional security cable
(Kensington’s).
qf
qfqf
qf Ventillation holes (intake,
bottom)
qg
qgqg
qg Lamp cover (bottom)
qh
qhqh
qh RELEASE (adjuster adjustment)
button
For details, see “How to use the
adjuster” on page 10.
qj
qjqj
qj Carrying handle
Pull up the handle from the projector for
carrying.
qk
qkqk
qk Ventilation holes (intake, rear)
How to use the adjuster
To adjust the height
Adjust the height of the projector as follows:
1
Lift the projector and press the
RELEASE button.
The adjuster will extend from the
projector.
2
While pressing the button, lower the
projector. Then, release the button.
For fine adjustment, turn the adjusters to
the right and the left.
• Do not remove the adjusters from the
projector. Do not use the projector with the
adjusters removed.
• Be careful not to let the projector down on
your fingers.
• Do not push hard on the top of the projector
with the adjusters out.
The security lock corresponds to
Kensington’s MicroSaver
®
Security
System.
If you require further information,
contact
Kensington
2855 Campus Drive
San Mateo, CA 94403
In North America
Phone: 800-235-6708
Fax: 800-247-1317
Outside North America
Phone: 847-541-9500
Home page address:
http://www.kensington.com/
Notes
RELEASE button
to raise the
projector
to lower the
projector