Filter
Top Products
27
GB
Projecting
Setting Up and Projecting
To Use the security lock
1 Press the MENU key and then, in the INSTALL SETTING menu, turn on
the
“Security Lock” setting.
2 Enter the password.
Use the MENU, M/m/</,, and ENTER keys to enter the four-digit
password. (The default initial password setting is “ENTER, ENTER, ENTER,
ENTER”. After this is entered you can put in your own password. Therefore
when you use this function for the first time, please input “ENTER” four
times.)
Next, the screen for entering the new password is displayed. (Enter the
password at this screen even if you want to keep the current password.)
3 Enter the password again to confirm.
If the password is entered incorrectly, the menu screen displays an “Invalid
Password” message.
Enter password key.
Password required for power-on.
Use: Cancel: Other key
Enter new password key.
Power-on cannot be performed
without the password.
Use: Cancel: Other key
Re-enter new password key.
Be sure to remember this password.
Use: Cancel: Other key
Tilt...
V Keystone: Auto...
Image Flip: Off
Background: Blue
Lamp Mode: Standard
High Altitude Mode
: Off
Security Lock: Off
INSTALL SETTING
Input A
Invalid Password!
X