Sony VPL-CS6 Projector User Manual


 
GB
8 Features
Tilting the unit to the right or left
Avoid tilting the unit to an angle of 15°, and
avoid installing the unit in any way other
than placing on the floor or suspending from
the ceiling. Such installation may cause
color shading or shorten the lamp life
excessively.
Blocking the ventilation holes
Avoid using something to cover over the
ventilation holes (exhaust/intake);
otherwise, the internal heat may build up.
For details on the ventilation holes (intake/
exhaust), see “Location and Function of
Controls” on page 10.
When using the projector at an altitude of
1,500 m or higher, turn on “High
Altitude Mode” in the INSTALL SETTING
menu. Failing to set this mode when using
the projector at high altitudes could have
adverse effects, such as reducing
the reliability of certain components.
The unit is manufactured using high-
precision technology. When transporting
the unit stored in the soft case, do not drop
the unit or subject it to shock, as this may
cause damage. When storing the unit in the
soft case, disconnect the AC power cord
and all other connecting cables, and store
the supplied accessories in a pocket of the
soft case.
When using a screen with an uneven
surface, stripes pattern may rarely appear
on the screen depending on the distance
between the screen and the projector or the
zooming magnifications. This is not a
malfunction of the projector.
Features
High operability
Intelligent Auto-setup function
Simply press the power key, and the
projector automatically performs the
setups required before use. The projector
opens the lens protector, corrects the V
Keystone, and sets optimum conditions for
projection. This function is called
Intelligent Auto-setup.
For easier operations, the keys that will be
used frequently are allocated on the top of
the projector.
Short focus lens equipped (VPL-
CS6/CX6 only)
This projector is equipped with a short focus
lens that allows outputting to a larger screen
even in a limited space.
Accepts various input signals
Scan converter loaded
This projector has a build-in scan
converter that converts the input signal
within 1024 × 768 dots (VPL-CX6/EX1)
or 800 × 600 dots (VPL-CS6) .
Compatible input signals
This projector accepts video signals of
composite, S video, and component as
well as VGA, SVGA, XGA, SXGA
1)
and
SXGA+
1)
signals, which all can be
displayed.
Compatible with six color systems
NTSC, PAL, SECAM, NTSC
4.43
2)
, PAL-
M, or PAL-N color system can be selected
automatically.
Usage in High Altitude
Notes
..............................................................................................................................................................
1) The SXGA and SXGA+ signals are available for the VPL-CX6/EX1 only.
2) NTSC
4.43 is the color system used when playing back a video recorded on NTSC on a NTSC4.43
system VCR.