Sony UP-D23MD All in One Printer User Manual


 
Getting Started
Connections
7
Assembly
To attach the paper tray
For details of how to load the ink ribbon and paper, see
“Loading an Ink Ribbon” on page 9 and “Loading
Paper” on page 11.
Connections
After connecting the USB connecting cable (supplied)
to the printer and the computer, connect the power cord.
For details about the printer connection, refer to the
manuals for the computer or other peripheral devices.
Notes
Before connecting the printer to the computer, turn off
the printer, computer, monitor, and all peripheral
devices connected to the computer.
Before connecting the printer to the computer,
disconnect the power cord from the printer. Connect
the power cord to the printer only after connecting the
printer and the computer.
The printer is provided with a USB interface that can
be connected to any computer equipped with a USB
interface.
Follow the connection procedures described in the
computer manual.
Make sure that the interface cable is connected
securely at both ends.
The printer drive software provided with the printer is
not suitable for using the printer connected to a
network.
Operation of the printer is not guaranteed for
connection to a USB hub.
USB Port Connection
Paper tray
USB connecting
cable
to (USB) connector