Filter
Top Products
9
GB
Continued on next page
VGP-WKB5_3-271-911-02(1)
3 Insert the four supplied R6 (size AA) batteries with the
correct eE orientation.
4 Close the cover.
Connecting the receiver to the computer
Connect the receiver to the computer using the receiver cable.
When connecting the receiver to the computer for the first time
The first time the receiver is connected to the computer, the Windows
operating system automatically installs the standard USB device driver.
Notes
• Drivers for USB devices must be installed for each port used. If you connect the
receiver to a different USB port on your computer, the driver installation procedure will
be repeated for that USB port.
• Connect the receiver only to a built-in USB port. Do not connect the receiver to an
external USB hub.
To the computer’s
(USB) port