Filter
Top Products
97
nN
Upgrading Your VAIO Computer
7 Secure the drive to the drive holder with screws, through the holes on each side of the drive holder.
!
New hard disk drives may come with necessary screws. Do not overtighten these screws when securing the drive to the drive holder.
8 Connect the power cables to the preinstalled and new hard disk drives.
9 Connect the SATA cables to the hard disk drives as follows:
!
Use of a commercially available SATA cable with the straight-head connector may damage the connector on the hard disk drive by being pulled out
when you replace the drive holder. We recommend you use Sony SATA cables exclusively designed for your computer.
Connect the internal SATA cables: To the hard disk drives in:
PORT0 cable Bottom drive bay
PORT1 cable Middle drive bay
PORT3 cable Top drive bay