Filter
Top Products
28
1 Press the ?/1 (On/standby) switch.
A message “POWER OFF?” appears on the screen.
2 Press the ?/1 (On/standby) switch again before the message disappears.
The
?/1 (On/standby) indicator flashes in green and the fan continues to run to reduce the
internal heat. First, the
?/1 (On/standby) indicator flashes quickly, during which you will
not be able to light up the
?/1 (On/standby) indicator with the ?/1 (On/standby) switch.
3 Confirm that the fan stops running and the ?/1 (On/standby) indicator
lights in red.
You can turn off the projector by holding the
?/1 (On/standby) switch for about 1 second,
instead of performing the above steps.
Selecting the Wide Screen Mode
You can enjoy various wide screen modes according to the video signal received.
Turning Off the Power
Press WIDE MODE.
Each time you press the button, you can
change the “Wide Mode” setting in turn.
You can also select it using the menu. (1
page 44)
* RCP button: VPL-AW15 only
WIDE MODE
button