Filter
Top Products
34
4 Make the setting or adjustment of
an item.
When changing the adjustment
level
To increase the value, press M/,.
To decrease the value, press m/<.
Press to restore the previous screen.
When changing the setting
Press M/m to change the setting.
Press to restore the previous screen.
You can restore the previous screen
using < depending on the selected
item.
Items that cannot be adjusted
Adjustable items differ depending on the
input signal. The items that cannot be
adjusted or set do not appear in the menu.
(1 page 45)
To clear the menu
Press MENU.
The menu disappears automatically if a
button is not pressed for one minute.
To reset the items that have been
adjusted
Select an item that you want to reset, then
press RESET on the remote control.
The message “Complete!” appears on the
screen and the setting of the item that you
have selected is reset to its factory preset
value.
Items that can be reset are:
• “Contrast,” “Brightness,” “Color,” “Hue”
and “Sharpness” in the “Adjust Picture...”
menu of the PICTURE SETTING menu
• “Dot Phase,” “H Size,” and “Shift” in the
“Adjust Signal...” menu of the INPUT
SETTING menu
Storage of the settings
The settings are automatically stored in the
projector memory when the button is
pressed.
If no signal is input
If there is no input signal, the message
“Cannot adjust this item.” appears on the
screen.
A
MENU SETTING
Input A
On
English
Status:
Language:
Menu Position:
Start Up Image
Top left
Bottom Left
Center
Top Right
Bottom Right
Pop-up menu
Setting itemsMenu
Adjustment menu
PICTURE SETTING
Contrast: 80
Brightness: 50
Gamma Mode: Off
Color Temp.: High
Input A
ADJUST PICTURE
Standard
Next menu window
Setting itemsMenu