Filter
Top Products
39
Using the Menus
SET SETTING Menu
The SET SETTING menu is used for changing the settings of the projector.
Setting items Functions Initial setting
Smart APA The APA (Auto Pixel Alignment) automatically
adjusts “Dot Phase,” “H Size” and “Shift” in the
INPUT SETTING menu for the input signal from
a computer.
On: When a signal is input from a computer, the
APA functions automatically so that the picture
can be seen clearly. Once the specified input
signal has been adjusted by the “Smart APA,” it
will not be readjusted even when the cable is
disconnected and connected again or the input
channel is changed. You can adjust the picture by
pressing APA on the remote control even if “Smart
APA” is set to “On.”
Off: APA functions only when you press APA on the
remote control.
On
Auto Input Search Detects the input signal and displays the detected
input signal automatically when the INPUT
button is pressed.
When set to “On,” the projector detects input signals
in the following order: Input-A, HDMI, Video and S-
Video. It indicates the input channel when the power
is turned on or the INPUT button is pressed.
Off
Input-A Signal
Sel.
Selects the type of signal input from the
equipment connected to the INPUT A connector.
Selects the type of signal input from the equipment
by selecting “Input-A” with the INPUT button.
Auto: Selects the input signal type automatically.
Computer: Inputs the signal from a computer.
Component: Inputs the component signal from a
DVD player/recorder, Blu-ray Disc player, digital
tuner, etc.
Video GBR: Inputs the signal from a TV game or
HDTV broadcast.
Auto
SET SETTING
Input-A
Smart APA: On
Auto Input Search:
Off
Input-A Signal Sel.:
Auto
Color System: Auto
Power Saving: Off
IR Receiver: Front & Rear
Lamp Timer Reset