Filter
Top Products
33
Using Network Features
Network
Speed: Select the network speed of the
projector.
Set the WLAN network function on the
Setup page.
Entered values will not be applied unless
you click on [Apply].
1 Click the [WLAN Setting] to open the
WLAN Setting page.
2 Enable or disable the radio wave
output of USB wireless LAN module.
Wireless ON: Enables radio wave
output of USB wireless LAN module.
Wireless OFF: Disables radio wave
output of USB wireless LAN module.
WLAN Network: Set the modes for
USB wireless LAN module.
3 (a) Input the settings for Access Pt.
Mode.
When the USB wireless LAN module is
activated as an access point, set the items
for the access point.
Probe Response ON: Responds to the
probe request from the client.
Probe Response OFF: Does not
respond to the probe request from the
client.
Network Name (SSID): Displays the
SSID of the access point if “WLAN
Network” is set to “Access Pt. (Auto).”
Input the SSID of the access point if
“Access Pt. (Manual)” is selected.
Channel Setting: Displays the channel
of the access point if “WLAN
Network” is set to “Access Pt. (Auto).”
Select the channel of the access point
if “Access Pt. (Manual)” is selected.
Encryption Type: Displays the security
method of the access point if “WLAN
Network” is set to “Access Pt. (Auto).”
Select the security method of the
access point from the following list if
“Access Pt. (Manual)” is selected.
Key: Input the password for security
method of the access point according
to the selected encryption type as
below;
Setting the WLAN Network of
the projector
Items Descriptions
Access Pt.
(Auto)
Activates USB wireless
LAN module as an access
point, and items for
WLAN are automatically
set.
Access Pt.
(Manual)
Activates USB wireless
LAN module as an access
point. Set the items for
WLAN manually.
Client Activates USB wireless
LAN module as a client.
3-(a)
2
WLAN Setting button
Encyption
Type
Descriptions
Open Sets the security method
of the access point to open
system authentication.
WEP 64bit Sets the security method
of the access point to
WEP (64bit).
WEP 128bit Sets the security method
of the access point to
WEP (128bit).
MIX (WPA-
PSK/WPA2-
PSK (TKIP/
AES))
Sets the security method
of the access point to
MIX. (corresponding to
both WPA-PSK (TKIP/
AES) and WPA2-PSK
(AES) security methods).
WPA2-
PSK(AES)
Sets the security method
of the access point to
WPA2-PSK (AES).