Filter
Top Products
27
Projecting
Projecting the Picture
Press the TILT/KEYSTONE key on the
projector or KEYSTONE/TILT key on
the Remote Commander to display the
Tilt menu and adjust the tilt using the v/
V/b/B keys.
• When you adjust the powered tilt
adjuster with the TILT/KEYSTONE key,
the V keystone adjustment is performed
at the same time. If you do not want to
perform the automatic keystone
adjustment, set the “V Keystone” to
“Manual.” (See page 44.)
• If you set the “V Keystone” adjustment
to “Auto,” the “V Keystone” correction
is automatically adjusted. However, it
may not be perfectly adjusted depending
on the room temperature or the screen
angle. In this case, adjust it manually.
• Press the TILT/KEYSTONE key until
“V Keystone” appears on the screen, and
adjust the value with the v/V/b/B key.
The corrected value is effective until the
power is turned off.
• Be careful not to let the projector down
on your fingers.
• Do not push hard on the top of the
projector with the powered tilt adjuster
extended.
It may cause a malfunction.
7 Adjust the size of the picture.
To adjust using the Remote
Commander
Press the LENS key on the Remote
Commander to display the Lens Zoom
menu and adjust the size of the picture
using the v/V/b/B keys.
To adjust using the control panel on
the rear of the projector
Press the ZOOM/FOCUS keys on the
projector to display the Lens Zoom
menu and adjust the size of the picture
using the v/V/b/B keys.
8 Adjust the focus.
To adjust the focus automatically
Press the AUTO FOCUS key on the rear
of the projector or on the Remote
Commander.
To adjust the focus manually
To adjust the focus using the Remote
Commander:
Press the LENS key on the Remote
Commander to display the Lens Focus
menu and adjust the focus using the v/
V/b/B keys.
The focus cannot be fine adjusted, because
of characteristics of the screen onto which
the image is projected. In this case, adjust
it manually.
To adjust the focus using the control
panel on the rear of the projector:
Press the ZOOM/FOCUS keys to
display the Lens Focus menu and adjust
the focus using the v/V/b/B keys.
Notes
to lower the
projector
TILT/KEYSTONE key
to raise the
projector
Powered tilt
adjuster
Note