Filter
Top Products
15 (EN)
RESET
PATTERN PICTURE
AUDIO LIGHT
POWER
ENTER
MENU
INPUT
SELECT
MUTING VOLUME
POWER
STANDBY
LAMP
TEMP
u
POWER
VOLUMERESET
INPUT
MUTING
PIC
AUDIO
M
E
N
U
E
N
T
E
R
MAIN
POWER
O ON ⁄ o OFF
1 Press the MAIN POWER switch on the rear of the projector (O ON).
The STANDBY indicator lights in red and the projector goes into the
standby mode.
2 Press the POWER key on the Remote Commander or the control
panel.
The POWER indicator lights in green.
3 Switch on equipment connected to the projector. Press the INPUT
SELECT key on the control panel or the INPUT key on the Remote
Commander to select the input source.
INPUT-A: Selects signal input from the INPUT-A and AUDIO IN L/
R connectors.
VIDEO: Selects signal input from the VIDEO IN and AUDIO IN L/
R connectors.
(If you have made connections to both the S VIDEO and
the VIDEO connectors, the signal from S VIDEO
connector is selected.)
(continued)
Projecting
Front remote control
detector
2
3
3
POWER indicator
STANDBY indicator
Rear remote control
detector
1
2
5
4