Filter
Top Products
16 (EN)
Changing the picture mode
You can change the picture mode according to the picture to be used or the
video signal.
1 Press the MENU key to display the menu.
2 Press the V/v keys on the control panel to select ASPECT SELECT,
then press the b key or the ENTER key.
3 Make setting or adjustment on an item.
For details on setting individual items, see page 24.
4 Press the PATTERN key on the control panel to display the “H” test
pattern, and turn the focus ring to adjust the focus.
Projecting
Press the PATTERN key again to clear the pattern.
5 Turn the zoom ring to adjust the size of the picture.
Note
Do not look into the lens when the projector lamp is on.
To Press
Adjust the volume the VOLUME +/– keys.
Cut off the sound the AUDIO MUTING key. To restore
the sound, press the AUDIO MUTING
key again or press the VOLUME + key.
Cut off the picture the PICTURE MUTING key (PIC
MUTING key on the Remote
Commander). To restore the picture,
press the PICTURE MUTING key
again.
HHHH HHHH
HHHH HHHH
HHHH
HHHH
HHHH HHHH
HHHH HHHH
VIDEO
AUTO WIDE:OFF
ASPECT:SUB TITLE
V SCROLL: 0
TITLE AREA: 4
INPUT
SELECT
MEMORY
SELECT
ASPECT
SELECT
SET
SETTING
INPUT
INFO.
SEL: EXIT: MENU