Sony Ericsson GC82 Network Card User Manual


 
28 Wireless Manager Telephony Settings Screen
Data:
The number used to make a data call to the EDGE PC Card (Mobile Terminated).
Fax:
Fax is not supported by the EDGE PC Card.
SMS Service Centre
When you send a text message it goes to your operator's service centre, they then forward
it to the correct recipient. The SMS service centre is identified by a telephone number.
Note:
The SMS Service Centre number is normally read automatically from your SIM card.
To Set or change the service centre address:
1. Enter your operator's service centre phone number in the Number text box.
2. Click Apply to transfer the setting to your EDGE PC Card.
Locks
Phone lock
The phone lock protects the EDGE PC Card against unauthorized use if it is stolen and used
with another SIM card. Phone Lock is not activated when you buy the EDGE PC Card.
You can use this screen to change the default security code (0000) to any four to eight digit
personalized code.
You can set the Phone Lock Status to one of the following states:
On - A brief message Phone lock is displayed each time you turn on the computer.
The Enter phone lock code dialog opens. Enter your code into the dialog and click OK.
Off - The EDGE PC Card is not locked.
Automatic - If the Automatic setting is selected, the message Phone lock only appears when
a different SIM card is inserted into the EDGE PC Card. After the security code has been entered
correctly, the EDGE PC Card can be used with the new SIM card.
Note:
The Phone Lock code has four to eight digits and is shown as asterisks upon entry in the dialog.
To Change the Phone Lock code:
1. Click .
2. The Change the Phone Lock Code dialog opens. Make the required changes and click OK.
3. Click Apply when you have finished, to transfer the changes back to your EDGE PC Card.
This may take a few seconds.
SIM lock
Some SIM cards are protected with a PIN (Personal Identity Number) at the time of purchase.
If the SIM card lock is activated, you have to enter the PIN every time you turn on your PC and
open Wireless Manager. If you enter your PIN incorrectly three times in succession, the SIM card
is blocked and you need a PUK code, from your network operator, to unblock the SIM card.
Change Phone Code