Filter
Top Products
ALI M5281 IDE3/IDE4 Driver Installation
SY-KT880 DRAGON 2
84
Install driver during Windows 2000 installation
1. Go to “d:\raid\M5283\SATA50XX” directory, (assuming that
your CD-ROM is drive d) copy all the files and folders to a
floppy disk.
2. Windows 2000 will start to inspect your hardware configuration
3. Press “F6” when the message “Press F6 if you need to install a third
party SCSI or RAID driver….” Appear.
4. Press
S
key to specify additional devices when the
Windows 2000
Setup window appears.
5. Insert the floppy disk containing driver, then press Enter to continue
6. In the following window of device type, please select “which
“M5281 SATA RAID controller (Windows 2000)” to continue
7. Win 2000 will prompt you that a message that the driver is newer
than the default driver, press S (use the driver on floppy) to continue
8. The following interface will list the devices to be installed, in which
“M5281 SATA RAID controller (Windows 2000)” item should be
included. (If users want to install other devices, press “S” at this
time.) Press ENTER to continue Windows 2000 setup