Filter
Top Products
BIOS Setup Utility SY-5SSM & SY-5SSM/5
63
3-8.1 IDE Device Controls
IDE Controls Setting Description Note
Both Default
Disabled
Primary
Internal PCI/IDE
Secondary
Selects which PCI IDE
controller to use.
The following fields may be configured only if [Internal PCI/IDE] is
set to [Both], [Primary], or [Secondary].
Mode 0-4 0 is the slowest speed
4 is the fastest speed
IDE
Ø Primary Master PIO
Ø Primary Slave PIO
Ø Secondary Master PIO
Ø Secondary Slave PIO
Auto For better performance
and stability, we
suggest you use the
Auto setting to set the
HDD control timing.
Default
Disabled
Ø Primary Master UltraDMA
Ø Primary Slave UltraDMA
Ø Secondary Master U-DMA
Ø Secondary Slave U-DMA
Auto Select Auto to enable
Ultra DMA Mode
support.
Default
The following field may be configured only if [Internal PCI/IDE] is set
to [Both], [Primary], or [Secondary].
Disabled
IDE Burst Mode
Enabled Select this option if
your hard disk support
this function.
Default
Disabled
IDE Data Port Post
Write
Enabled Select this option if
your hard disk support
this function.
Default
Disabled
IDE HDD Block Mode
Enabled Invokes multi-sector
transfer instead of one
sector per transfer. Not
all HDDs support this
function.
Default