Filter
Top Products
Hardware Setup SY-6BA+
23
Step 16. Quick BIOS Setup
This Motherboard does not use any hardware jumpers to set the
CPU frequency. Instead, CPU settings are software configurable
with the BIOS [SOYO COMBO SETUP]. The [SOYO COMBO
SETUP] menu combines the main parameters that you need to
configure, all in one menu, for a quick setup in BIOS.
After the hardware installation is complete, turn the power switch on,
then press the <DEL> key during the system diagnostic checks to
enter the Award BIOS Setup program. The CMOS SETUP UTILITY
will display on screen. Follow these steps to configure the CPU
settings.
1. Select [LOAD SETUP DEFAULT]
Select the “ LOAD SETUP DEFAULT” menu and type “ Y” at the
prompt to load the BIOS optimal setup.
2. Select [STANDARD CMOS SETUP]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to
“ Auto”.
3. Select [SOYO COMBO SETUP]
Move the cursor to the [CPU Frequency] field to set the CPU
frequency, as shown in the following display.
ROM PCI/ISA BIOS
SOYO COMBO SETUP
AWARD SOFTWARE, INC.
CPU Frequency
CPU Host/PCI Clock
CPU Ratio
AGP Clock
: 350Mhz(100*3.5)
: 100/33MHz
: x 3.5
: Auto
CPU Warning Temperature
Current System Temp.
Current CPU Temperature
Current CPUFAN Speed
Current CHAFAN Speed
: Disabled
: 24
°
C/75
°
F
: 29
°
C/84
°
F
: 6553 RPM
: 6553 RPM
CPU L2 Cache ECC Checking : Enabled
Boot Sequence : A, C, SCSI
Quick Power On Self Test : Enabled
VID(V)
3.3(V)
+12(V)
-5(V)
: 2.78 V
: 3.31 V
: 11.84V
: -4.88V
VTT(V)
+5 (V)
-12 (V)
: 1.50V
: 4.97V
: -11.45V
CPUFAN Off In Suspend : Enabled
ESC
F1
F5
: Quit
: Help
: Old Values
↑
↓
→
←
PU/PD/+/-
(Shift) F2
: Select Item
: Modify
: Color
POWER ON Function
KB Power ON Password
Hot Key Power ON
Soft-Off by PWR-BTTN
Power-On by Ring/LAN
Power-On by Alarm
: BUTTON ONLY
: Enter
: Ctrl-F1
: Instant-Off
: Enabled
: Disabled
F6
F7
: Load BIOS Defaults
: Load Setup Defaults
CPU Frequency
CPU Host/PCI Clock
CPU Ratio
AGP Clock
: 350Mhz(100*3.5)
: 100/33MHz
: x 3.5
: Auto