SY-6IEM
Quick Start Guide
5
Hardware
Installation
2
2
Installation
To avoid damage to your mainboard, follow these simple rules while
handling this equipment:
l
Before handling the mainboard, ground yourself by grasping an unpainted portion of
the system's metal chassis.
l
Remove the mainboard from its anti-static packaging. Hold it by the edges and avoid
touching its components.
l
Check the mainboard for damage. If any chip appears loose, press carefully to seat it
firmly in its socket.
Follow the directions in this section designed to guide you through a quick and correct
installation of your new
SY-6IEM
Mainboard. For detailed information, please refer to SY-
6IEM Mainboard User's Guide and Technical Reference online manual included on the CD-
ROM packed with your mainboard.
PREPARATIONS
Gather and prepare all the necessary hardware equipment to complete the installation
successfully:
u
Pentium
®
II
processor with built-in CPU cooling fan (boxed type)
u
SDRAM module
u
Computer case and chassis with adequate power supply unit
u
Monitor
u
PS/2 Keyboard
u
Pointing Device (PS/2 Mouse)
u
VGA Card
u
Speaker(s) (optional)
u
Disk Drives: HDD, CD-ROM, Floppy drive…
u
External Peripherals: Printer, Plotter, and Modem (optional)
u
Internal Peripherals: Modem and LAN cards (optional)
Notice 1:
This mainboard features three built-in audio-stereo ports. Therefore you do not
need to install a sound card.
Notice 2:
If you want to use an external speaker connected to "Line-out" port, please make
sure to use an "amplified speaker" that can generate proper output sound volume.