Filter
Top Products
Hardware Installation
SY-7ISA+
47
Step 1. Select [STANDARD CMOS SETUP]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to
“Auto”.
Step 2. Select [Load Optimized Defaults]
Select the “Load Optimized Defaults” menu and type “Y” at the prompt to
load the BIOS optimal setup.
Step 3. Select [SOYO COMBO Feature]
Move the cursor to the [CPU HOST / PCI Clock / PC133] field to set the
CPU frequency.
Available [CPU HOST / PCI Clock / PC133] settings on your SY-7ISA+
Motherboard are detailed in the following table.
CPU HOST / PCI Clock / PC133
105 / 35MHz / NO
Default 110 / 37MHz / NO
66 / 33MHz / NO 115 / 38MHz / NO
68 / 35MHz / NO 133 / 33MHz / Yes
70 / 35MHz / NO 137 / 34MHz / Yes
75 / 38MHz / NO 140 / 35MHz / Yes
80 / 40MHz / NO 145 / 36MHz / Yes
83 / 42MHz / NO 150 / 37MHz / Yes
100 / 33MHz / NO 160 / 38MHz / Yes
103 / 34MHz / NO 166 / 42MHz / Yes
Select the working frequency of your Pentium
®
III, Celeron processor among these preset
values.
Note: Mark the checkbox that corresponds to the working frequency of your Pentium
®
III,
Celeron
processor in case the CMOS configuration should be lost.
Step 4. Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory, and
continue the boot sequence.