Filter
Top Products
BIOS Setup Utility
SY-7ISA+
71
3-5.3 IDE HDD Block Mode
Setting Description Note
Disabled
IDE HDD Block Mode
Enabled Invokes multi-sector
transfer instead of one
sector per transfer. Not
all HDDs support this
function.
Default
3-5.4 Others Optional
Setting Description Note
Password Enables you to wake-up the
system by entering a password at
the keyboard.
Hot KEY You can wake-up the system by
pressing the key combination of
your choice (Ctrl-F1~F12).
Mouse Left
Mouse Right
Enables waking up the system by
pressing either the right or left
mouse button.
BUTTON-ONLY Disables the Wake-Up by
Keyboard function.
Default
POWER ON
Function
Keyboard 98
If [POWER ON Function] is set to [Password]
KB Power ON
Password
Enter (your
password)
Set the password that will wake-up your
system.
If [POWER ON Function] is set to [Hot Key]
Hot Key Power
ON
Ctrl-F1~F1
2
Choose the key combination that will
wake-up the system. [Ctrl-F1 to Ctrl-F12]
3-5.5 FDC Controls
FDC Controls Setting Description Note
Disabled Turn off the on-board
floppy controller
Onboard FDC
controller
Enabled Use the on-board floppy
controller
Default