Filter
Top Products
BIOS Setup Utility
SY-7ISA+
56
3-1 SOYO COMBO SETUP
This Motherboard does not use any hardware jumpers to set the CPU
frequency. Instead, CPU settings are software configurable with the BIOS
[SOYO COMBO SETUP].
After the hardware installation is complete, turn the power switch on, then
press the <DEL> key during the system diagnostic checks to enter the
Award BIOS Setup program. The CMOS SETUP UTILITY will display on
screen. Then, select the [SOYO COMBO SETUP] option from the main
menu and press the <Enter> key.
CMOS Setup Utility – Copyright ( C ) 1984-2000 Award Software
SOYO COMBO Feature
CPU Host/ PCI Clock/ PC133 100/ 33 MHz
CPU Clock Ratio X 3
Item Help
CPU L2 Cache ECC Checking Enabled
Auto Detect DIMM/ PCI CLK Enabled
Spread Spectrum Disabled
C.I.H. 4-WAY Protection Enabled
Onboard codec control Enabled
Quick Power On Self Test Enabled
System Memory Frequency Auto
SDRAM CAS Latency Time 3
SDRAM Cycle Time Tras/ Trc 7/ 9
SDRAM RAS-to-CAS Delay 3
SDRAM RAS Precharge Time 3
Menu Level
First Boot Device Floppy
Second Boot Device HDD-0
Third Boot Device LS120
Boot Other Device Enabled
AC97 Audio Auto
AC97 Modem Auto
: Move
Enter : Select + / - / PU / PD : Value F10 : Save ESC : Exit F1: General Help
F5 : Previous Values F6 : Fail – Safe Defaults F7 : Optimized Defaults
The [SOYO COMBO SETUP] menu combines the main parameters that
you need to configure, all in one menu, for a quick setup in BIOS.