Filter
Top Products
SY-7IWB Quick Start Guide
6
Hardware
Installation
2
2
Installation
To avoid damage to your Motherboard, please follow these simple rules while
handling this equipment:
l
Before handling the Motherboard, ground yourself by holding on to an unpainted
portion of the system's metal chassis.
l
Remove the Motherboard from its anti-static packaging. Hold the motherboard by the
edges and avoid touching its components.
l
Check the Motherboard for damage. If any chip appears to be loosened, press
carefully to seat it firmly in its socket.
Follow the directions in this section which is designed to guide you through a quick and
correct method to install your new
SY-7IWB
Motherboard. For detailed information, please
refer to SY-7IWB Motherboard User's guide and Technical Reference online manual
enclosed in the CD-ROM package with your Motherboard.
Gather and prepare all necessary hardware equipment to complete the installation
successfully:
u
Celeron
TM
processor with built-in CPU cooling fan (boxed type)
u
SDRAM module
u
Computer case and chassis with adequate power supply unit
u
Monitor
u
Keyboard
u
Pointing Device (Mouse)
u
Speaker(s) (optional)
u
Disk Drives: HDD, CD-ROM, Floppy drive…
u
External Peripherals: Printer, Plotter(optional)
u
Internal Peripherals: MR and LAN cards (optional)
Note: 1.
This Motherboard features one built-in VGA port and three built-in audio-stereo
ports. Therefor you do not need to install neither a VGA card nor a sound card.
2.
If you want to use an external speaker connected to "Line-out" port, please make
sure to use an "amplified speaker" that can generate proper output sound volume.