Filter
Top Products
SY-7IWB
Quick Start Guide
7
Hardware
Installation
Install the Motherboard
To perform the installation of your new
SY-7IWB
Motherboard, follow the steps below
Step 1. CPU Installation
Mark your CPU Frequency:
Record the working frequency of your CPU
that should be clearly marked on the CPU cover.
300MHz (66 x 4.5) 333MHz (66 x 5.0) 366MHz (66 x 5.5) 400MHz (66 x 6.0)
433MHz (66 x 6.5) 466MHz (66 x7..0) 500MHz (66 x7.5)
This Motherboard is designed to support processors with 100MHz FSB. However, Socket
370 processors with 100MHz FSB are not available at present.
CPU Mount Procedure:
To mount the Celeron
TM
processor that you have
purchased separately, follow these instructions.
1.
Lift the socket handle up to a vertical position.
2.
Align the blunt edge of the CPU with the matching pinhole distinctive edge on the
socket.
3.
Seat the processor in the socket completely and without forcing.
4.
Then close the socket handle to secure the CPU in place.
Remember to connect the CPU Cooling Fan to the appropriate power
connector on the Motherboard. The fan is a key component that stabilize the
system. It prevents the equipment from overheating and prolongs the life of
your CPU.
1 2
3 4
S
o
c
k
e
t
3
7
0
S
o
c
k
e
t
3
7
0
S
o
c
k
e
t
3
7
0
S
o
c
k
e
t
3
7
0