Filter
Top Products
SY-K7VME/K7VM333
Quick Start Guide
13
Installation
Step 2. Configure Memory
Your board comes with Two DIMM sockets, providing support for up to 2GB of main memory using
unbuffered and non-ECC DIMM modules. On this motherboard, DRAM speed can be set
independent from the CPU FSB speed.
Memory Configuration Table
Number of Memory
Modules
DIMM 1 DIMM 2
RAM Type
DDR RAM PC2100/PC2700
(non-register & non-ECC)
Memory Module Size (MB) 128 / 256 / 512 / 1024 MB
Step 3. Installation of Expansion Cards
The motherboard has 1 AGP slot, 1 CNR slot and 2 PCI slots.
1. Read the related expansion card’s instruction document before inserting the expansion
card into the computer.
2. Press the expansion card firmly into expansion slot in the motherboard.
3. Make sure the metal contacts on the card are correctly seated in the slot.
4. Replace the screw to secure the slot bracket of the expansion card.
5. Install driver for the operating system you use.
Note: AGP cards working on 3.3V are not supported. Only AGP cards working on
1.5V can be used in this M/B. For AGP card voltage specification, please check the
AGP card manual or contact your AGP card’s manufacturer.