Filter
Top Products
SY-K7VME/K7VM333
Quick Start Guide
14
Installation
Step 4. Connections to the Motherboard
This section tells how to connect internal peripherals and the power supply to the motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan,
Front Panel Devices (Internal Speaker, Reset Button, IDE LED and power switch), Wake-On-LAN
card and other devices.
For more details on connecting internal and external peripherals to your new SY-K7VME/K7VM333
motherboard, please refer to SY-K7VME/K7VM333 motherboard User's Manual and Technical
Reference online manual on the CD-ROM.
Connectors and Plug-ins
AUDIO1 (Front Panel Audio Header)
Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10
AUD_MIC
AUD_
GND
AUD_
MIC_BIAS
AUD_VCC
AUD_
FPOUT_R
AUD_
RET_R
HP_ON KEY
AUD_
FPOUT_L
AUD_
RET_L
USB2 (Front panel USB Connector)
Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10
VERG_FP_
USBPWR0
VERG_FP_
USBPWR0
USB_FP_
P0-
USB_FP_
P1-
USB_FP_
P0+
USB_FP_
P1+
GND GND KEY
USB_
FP_OC0
J6:USB Card Reader Connector (Optional)
Pin1 Pin2 Pin3 Pin4 Pin5
VCC USB- USB+ GND KEY
SIR1 (Infrared Port)
Pin1 Pin2 Pin3 Pin4 Pin5 Pin6
NC KEY +5V GND IRTX IRRX
CD1 (Internal Sound Connections)
Pin1 Pin2 Pin3 Pin4
Connect the CD Line-in cord from the CD-ROM device to
the matching connector CD1
CD1 CD IN L GND GND CD IN R
Power LED
Pin1 Pin2 Pin3
VCC NC GND
Speaker
Pin1 Pin2 Pin3 Pin4
VCC NC NC Speaker out
HDD LED PWRBT RESET
Pin1 Pin2 Pin1 Pin2 Pin1 Pin2
LED Anode LED Cathode Power On/Off GND Control PIN GND
Speaker
Reset
PWRBT
Power LED
HDD LED