Filter
Top Products
SY-K7VME/K7VM333
Quick Start Guide
16
Quick BIOS
Setu
p
3
3
Quick BIOS Setup
This motherboard allows you to change your memory and onboard peripheral settings in BIOS setup.
After the hardware installation is complete, turn the power switch on, then press the <DEL> key during
the system diagnostic checks to enter the BIOS Setup program. The CMOS SETUP UTILITY will be
shown on the screen. Then, follow these steps to configure your system.
Step 1. Select [STANDARD CMOS SETUP]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”.
Step 2. Select [LOAD OPTIMIZED DEFAULTS]
Select the “LOAD OPTIMIZED DEFAULTS” menu and type “Y” at the prompt to load the BIOS optimal
setup.
Step 3.
Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory, and continue the boot sequence.