Filter
Top Products
SY-KT333 DRAGON Lite Quick Start Guide
12
Installation
Step 3. Configure Memory
Your board comes with three DIMM sockets, providing support for up to 3GB of main memory using
unbuffered and non-ECC DIMM modules from 64MB to 1GB. On this motherboard, DRAM speed can
be set independent from the CPU front side bus speed. Depending on the DRAM clock speed setting in
the BIOS setup, appropriate memory modules must be used. For 100MHz DRAM speed, use
PC1600 memory; for 133MHz DRAM speed, use PC2100 memory; for 166 MHz DRAM speed, use
PC2700 memory.
Memory Configuration Table
Number of Memory
Modules
DIMM 1 DIMM 2 DIMM 3
RAM Type DDR RAM
Memory Module Size
(MB)
64 / 128 / 256 / 512 / 1024 MB
Step 4 Install Expansion Card
The motherboard has 1 AGP PRO slot and 5 PCI slots.
1. Read the related expansion card’s instruction document before inserting the expansion card into
the computer.
2. Press the expansion card firmly into expansion slot in motherboard.
3. Be sure the metal contacts on the card are indeed seated in the slot.
4. Replace the screw to secure the slot bracket of the expansion card.
5. Install related driver from the operating system.
Step 5 Connections to the Motherboard
This section tells how to connect internal peripherals and the power supply to the motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front
Panel Devices (Internal Speaker, Reset Button and IDE LED Switch.), Wake-On-LAN card, VGA card,
Sound Card, and other devices.
For more details on connecting internal and external peripherals to your new SY-KT333 DRAGON Lite
motherboard, please refer to SY-KT333 DRAGON Lite motherboard User's Manual and Technical
Reference online manual on the CD-ROM.