Filter
Top Products
BIOS Setup Utility
SY-KT600 DRAGON Ultra
53
3-1 SOYO COMBO SETUP
This motherboard does not use any hardware jumpers to set the CPU
frequency. Instead, CPU settings are software configurable with the BIOS
[SOYO COMBO SETUP].
After the hardware installation is complete, turn the power switch on, then
press the <DEL> key during the system diagnostic checks to enter the
Award BIOS Setup program. The CMOS SETUP UTILITY will display on
screen. Then, select the [SOYO COMBO SETUP] option from the main
menu and press the <Enter> key.
Phoenix – Award BIOS CMOS Setup Utility
SOYO COMBO Feature
System Performance Normal
CPU Frequency Mode Auto
Item Help
x Frequency 1MHz Stepping 100
x CPU To PCI Divider /3
x DRAM:AGP:PCI Clock SPD: 66: 33
DRAM Clock By SPD
CPU Voltage Select Default
DDR (2.5V) Voltage Select Default
AGP (1.5V) Voltage Select Default
Advanced Tune-up Settings
Press Enter
Onboard SATA 1,2 Enabled
SATA 1,2 Mode IDE
Onboard SATA 3,4 Enabled
Onboard 1394 Enabled
Onboard 6Ch H/W Audio Enabled
Menu Level
Move
Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7: Optimized Defaults
The [SOYO COMBO SETUP] menu combines the main parameters that
you need to configure, all in one menu, for a quick setup in BIOS.