Filter
Top Products
Hardware Installation
SY-KT600 DRAGON Ultra
29
Step 4 Connect cables, case wires, and power supply
A. IDE Device Installation (HDD, CD-ROM)
This motherboard offers two primary and two secondary IDE device
connectors (IDE1, IDE2), can support up to four high-speed Ultra DMA
33/66/100/133 HDD or CD-ROM. SATA1/2/3/4 can support up to 4 ATA
150 SATA hard disks..
IDE1,2/ SATA1,2 are controlled by the 8237 South bridge chip, and
SATA3,4 are controlled by the Silicon Image Sil3112 controller..
There are 2 parallel ATA HDD connectors (IDE1, IDE2) and 4 serial ATA
connectors on the motherboard. SATA1, SATA2, SATA 3 and SATA4 are
provided for SATA RAID or standard SATA function. This Motherboard can
support up to 8 HDDs.
IDE 2IDE 1
Pin -1
Secondary
IDE
Primary
ID
E