Filter
Top Products
VIA 8237 Serial ATA Driver Installation
SY-KT600 DRAGON Ultra
112
Chapter 8
VIA 8237 Serial ATA Driver Installation
You can use your VIA 8237 (SATA1,SATA2) as
1. Normal IDE function.
2. RAID function. (RAID0, 1)
To use SATA1 and SATA2 as normal IDE, please do the following steps
1. Go to the CMOS setup SOYO COMBO Feature “Onboard
SATA1,2” to enable.
2. Then set the SATA 1,2 Mode to “IDE”
3. Install the VIA Serial ATA driver, see driver installation instruction
below.
To use SATA1 and SATA2 as RAID controller, please do the following
steps
1. Go to the CMOS setup SOYO COMBO Feature Onboard
Device and set the “Onboard SATA 1,2” to “Enable”.
2. Then set the SATA 1,2 Mode to “RAID”
3. Go to the CMOS setup ADVANCED BIOS Features and set
the “First Boot Device” to “SCSI”.
4. Set the “RAID/ATA & SCSI Boot Order” to ““SATA1,2,
SCSI,SATA3,4””.