Filter
Top Products
BIOS Setup Utility
SY-KT600 DRAGON Ultra
71
3-4.1 AGP & P2P Bridge Control
Caution:
Change these settings only if you are already familiar
with the Chipset.
The [AGP & P2P Bridge Control] option changes the values of the chipset
registers. These registers control the system options in the computer.
Phoenix – Award BIOS CMOS Setup Utility
AGP & P2P Bridge Control
AGP Aperture Size 64M
AGP Mode 4X
Item Help
AGP Driving Control Auto
x AGP Driving Value DA
AGP Master 1 WS Write Disabled
AGP Master 1 WS Read Disabled
AGP 3.0 Calibration cycle Enabled
Menu Level
:Move
Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7: Optimized Defaults
After you have completed the changes, press [Esc] and follow the
instructions on your screen to save your settings or exit without saving.
AGP & P2P Bridge Control
Setting Description Note
64M Default
32M
128M
AGP Aperture
Size
256M
Select the size of Accelerated Graphics
Port (AGP) aperture. The aperture is a
portion of the PCI memory address range
dedicated for graphics memory address
space. Host cycles that hit the aperture
range are forwarded to the AGP without
any translation.
1X
AGP Mode
2X
This item allows you to enable / disable
the AGP-4X Mode.
4X Default