Filter
Top Products
124
RAID issues
Windows does not detect the on-board RAID.
1. Enable the on-board RAID function in the BIOS.
2. install the RAID driver, see chapter 7 and 8 for more info
Can I use my CD-ROM or other IDE device (except HDD) on SATA 1,
SATA2, SATA3 or SATA 4
No, both SATA controllers (VIA and Silicon Image) only support HDD.
I cannot get the HDD to boot from SATA1, 2, 3 or 4, why?
Make sure that the 1
st
boot device in the BIOS is set to SCSI.
LAN Issues
During LAN driver installation, the system hangs on 75%, why?
Enable the onboard LAN in the BIOS setup.
For updated FAQs, please check http://www.soyo.com.tw/faq.htm or
http://www.soyousa.com/faqs.html