Filter
Top Products
BIOS Setup Utility
SY-KT600 DRAGON Ultra
78
3-5.3 SuperIO Device
Caution:
Change these settings only if you are already familiar
with the Chipset.
The [SuperIO Device] option changes the values of the chipset registers.
These registers control the system options in the computer.
The following screen shows setup default settings.
Phoenix – Award BIOS CMOS Setup Utility
SuperIO Device
Onboard FDC Controller Enabled
Onboard Serial Port 1 3F8/IRQ4
Item Help
Onboard Serial Port 2 2F8/IRQ3
UART Mode Select Normal
x UR2 Duplex Mode Half
Onboard Parallel Port 378/IRQ7
Parallel Port Mode SPP
x ECP Mode Use DMA 3
Menu Level
:Move
Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7: Optimized Defaults
After you have completed the changes, press [Esc] and follow the
instructions on your screen to save your settings or exit without saving.
SuperIO Device
Setting Description Note
Disabled Turn off the on-board
floppy controller
Onboard FDC
Controller
Enabled Use the on-board floppy
controller
Default