Filter
Top Products
BIOS Setup Utility
SY-KT600 DRAGON Ultra
58
DRAM Control
Setting Description Note
DRAM Timing
By SPD
Manual
If enable the DRAM will auto
detect the DRAM timing.
Default
3
2.5 Default
2
DRAM CAS
Latency
1.5
When synchronous DRAM is
installed, the number of clock
cycles of CAS latency depends
on the DRAM timing. Do not
reset this field from the default
value specified by the system
designer.
Disabled Default
Bank Interleave
2 Bank
4 Bank
Increase DRAM performance.
2T
3T
4T
Precharge to
Active(Trp)
5T
Increase DRAM performance.
Default
6T/8T
7T/10T Default
5T/6T
Tras
Non-DDR400/DD
R400
8T/12T
Increase DRAM performance.
2T
3T
4T
Active to CMD
(Trcd)
5T
Increase DRAM performance.
Default
4 Default
DRAM Burst
Length
8
Increase DRAM performance.
2T Command Default
DRAM Command
Rate
1T Command
Increase DRAM performance.
2T
DRAM Access
Time
3T
Increase DRAM performance.
Default