Filter
Top Products
Hardware Installation
SY-KT600 DRAGON Ultra
16
AB
Flash BIOS
This chip contains the system BIOS firmware, and is software
upgradable. It's size is 2Mbit. For updates of your Flash BIOS,
please go to http://www.soyousa.com. For details on how to setup
your BIOS, please go to the 2-3 Quick BIOS Setup chapter on page
48.
AC
ITE IT8705F Super I/O Chip
IT8705F is a LPC Interface based highly integrated Super I/O.
IT8705F provides the most commonly used legacy Super I/O
functionality plus the latest Environment Control initiatives, such
as Hardware Monitor, Fan Speed Controller and ITE’s
“SmartGuardian” function. The device’s LPC interface complies
with Intel “LPC Interface Specification Rev. 1.0” (Sept. 29, 1997).
IT8705F meets the “Microsoft
PC98/99/2001 System Design
Guide” requirements and is ACPI compliant.
AD
Center & Bass select connector (JP30)
Because some speaker manufacturers connect their center and bass
speakers different, this jumper allows you to select how your
center and bass speakers are connected. See the G. C en t e r & B a s s
Select Connector (JP30) paragraph on page 46 for more details.
AE
SPK5 connector
This connector is to connect the speaker attached to your case to
your motherboard. Please check the 6. SPK5 paragraph on page 43
for more details.
AF
CD SPDIF In connector
This connector is to connect the Digital SPDIF out of your
CDROM to your mainboard. For information on the pinout, please
check the 7. CD_SPDIF paragraph on page 43.
AG
32 bit PCI slots
These are the motherboard's 3.3v busmastering PCI slots,
compliant to PCI specification v2.2. Please check the Step 3 Install
Expansion Card paragraph on page 27 for more details.
AH
CMedia CMI 8738 PCI 6 Channel hardware audio chip
The CMI 8738 chip is a 2/4/6 Channel PCI hardware audio chip,
which uses the HRTF 3D positional audio technology. It is SB Pro
compatible and supports SPDIF IN/OUT. It also has a DLS
(DownLoadable Sound) wave table music synthesizer which
supports DirectMusic.