Filter
Top Products
121
My system intermittently locks up, during Windows installation.
1. Go to BIOS and load “load optimized defaults”.
2. Check the SOYO website for any BIOS update.
3. If it still has the problem, remove all other add-on cards except
CPU/ Memory/ Video card/Hard disk. See if you can finish
Windows installation. Then put peripherals in one by one to
identify which one cause the lockup.
My system will not boot-up when I set my CPU to 133MHz FSB, works
with 100MHz FSB
1. Be sure to put some thermal paste between the CPU and the CPU
heatsink.
2. Your CPU might be defective.
BIOS Issues
Where can I find the BIOS revision of my mainboard?
It will be displayed on the up-left corner on the screen during boot-up. It will
show as your board type followed by the revision number, such as
kvxa_2BA1 (meaning BIOS revision 2BA1 for the SY-K7V Dragon plus!
board) or 6BA+ IV_2AA2 which means SY-6BA+ IV motherboard with
2AA2 BIOS.
Where can I find the latest BIOS of my motherboard?
Please go to the technical support page of one of the SOYO websites
(Taiwan: http://www.soyo.com.tw
, US: http://www.soyousa.com), and look
up your motherboard to find the latest BIOS revision.
After flashing the BIOS, my system will not boot-up.
1. Try clearing the CMOS.
2. The BIOS chip is defected due to unsuccessful flash, contact your
nearest SOYO branch for re-flashing.
Is there a way to reprogram my BIOS after an unsuccessful flash?
No other way, you need to send back the BIOS ROM to your nearest SOYO
branch for re-flashing
.