Filter
Top Products
BIOS Setup Utility
SY-KT600 DRAGON Ultra
82
Power Management Controls (Continue)
Setting Description Note
Instant-off Default
Soft-Off by
PWR-BTTN
Delay 4 Sec. Turns off the system power 4
seconds after pushing the power
button.
Auto Default
Yes
Run
VGABIOS if
S3 Resume
N
o
Some OS (win xp/2k) requires to
load VGA BIOS after resume from
S3.
On The system will switch on when
power comes back after a power
failure.
Off The system will remain off when
power comes back after a power
failure.
Default
AC Loss
Auto Restart
Auto The system will return to the state it
was in before the power failure when
power returns. (i.e: If the system was
on, it will switch on again, if it was
off, it will remain off)
IRQ/Event
Activity
Detect
Press Enter Select items that will wake up your
system when in one of sleep modes.
Press enter to go the select item page.
IRQ/Event Activity Detect
Setting Description Note
Hot key Default
PS2KB
Wakeup Select
Password
You can boot-up your system by
PS/2 K/B VIA hotkey or
password.
Disabled
Ctrl+F1~F12
Power
Wake
Default
PS2KB
Wakeup from
S1-S5
Any Key
You can set the following hotkey :
1. Disable
2. Choose CTRL+F1 up to F12
3. The power key in the K/B. (if
available)
4. The wake-up key in the K/B. (if
available)
5. Any key in the K/B.