Filter
Top Products
VEHICLE INSTALLATION
6
Audi
Make sure you have your radio’s theft protection code before you attempt installation.
When you reconnect power to the battery, you will need to enter this code.
Information about the theft protection code can be found in your vehicle’s audio
operation manual.
Before connecting any cables to the black box you must set the dip switch to the Audi
position. If you set the dip-switches after you have connected cables to the box, you
must disconnect and reconnect them for the IPOD to operate.
§ All Models (1998-2004) – Pre-wired 13-pin cable in the left-rear trunk of all
Audi vehicles.
§ Audi A8 (2003-2004) – Not Compatible.
§ Audi A6 (2004) – Not Compatible.
Once you connect the IPOD2CAR ADAPTER, turn on your radio. A CD icon
will appear on the display of your radio showing that the IPOD2CAR ADAPTER
is ready to use.
Switch to the IPOD2CAR ADAPTER by pressing the CD/ Mode button on the
radio.
.
To change tracks simply press “Seek <” or “Seek >”
SETTINGS
FOR ALL
AUDIS
1 2 3 4 5 6 7 8
ON OFF OFF OFF OFF OFF OFF ON
OPERATION