Filter
Top Products
VEHICLE INSTALLATION
7
Ford (Ford, Lincoln, Mercury)
Before connecting any cables to the black box you must set the dip switch to the
“Ford 1” position. If you set the dip-switches after you have connected cables to the
box, you must disconnect and reconnect them for the IPOD2CAR to operate.
See the next page for a full list of vehicles as well as plug location in each.
Switch to the IPOD2CAR ADAPTER by pressing the “CD” button on the radio.
To change tracks simply press “Seek <” or “Seek >”
If you would like to connect IPOD2CAR ADAPTER to 2004 - Town Car, Grand
Marquis, Marauder, LS and Ford Crown Victoria, please see Ford appendix, page 19.
SETTINGS
FOR FORD
FOCUS &
COUGAR
1 2 3 4 5 6 7 8
ON ON OFF OFF OFF OFF OFF ON
SETTINGS
FOR ALL
OTHERS
1 2 3 4 5 6 7 8
OFF ON OFF OFF OFF OFF OFF ON
OPERATION
*If
you use
“Ford 16 Pin”
,
“Ford 20 pin”
and
“Ford RCU cable”
, make sure you connect the
Yellow
loose wire to
Constant 12V+ and the Black loose wire to Ground or any part of the car chassis.
*If you don’t know the location of constant 12V+, please use a Volt meter, or consult a Ford dealership.