Filter
Top Products
30
Exiting the User Setup Utility
❏ While in the User Setup Utility, select the Exit item from the menu bar.
❏ Specify whether or not you want to send the settings to the printer by
clicking on the corresponding item on the screen. Or you can use the up and
down arrow keys to highlight the selection you want and then press Enter
to execute.
Using the Help window
❏ While in the User Setup Utility, select Help from the menu bar.
❏ Select the item you want help on from the list on the right side of the
screen. You can select an item either by clicking on it with the mouse or by
scrolling through the items with the keybord’s up down arrow keys.
= Scroll up
= Scroll down = Enter = Menu Select
Exit and send the settings to the printer
Exit and do not send the settings to the printer
Exit
Load Save General Font Paper Adjust. Port Help
Exit
Load Save General Font Paper Adjust. Port Help
= Scroll up
= Scroll down = Menu Select
Exit
Load
Save
General
Font
Paper
Adjustment
Port
About
Exit
You can leave the program here.
You can decide on sending the currently
active data to the printer.
If you would like to use a special setting
in future again, it may be useful to save
them with the save menu.
TAB
= Next help menu