Filter
Top Products
Select character set #2
Mode ASCII
Decimal
Hexadecimal
Both <ESC> “6” 27 54 1B 36
Selects character set #2.
Select international character set
Mode ASCII
Decimal Hexadecimal
Std. cESC>
“R” n 27 02 n 18 52 II
IBM cFS> “R” II
20 02 n 1C 52 II
.-
Selects an international character set according to the value of n.
n Character set
0
U.S.A
1
France
2
Germany
3
England
4
Denmark1
5
Sweden
6
Italy
n Character set
7
Spain I
8
Japan
9
Norway
10
Denmark II
11
Spain II
12
Latin America
13
Denmark/Norway
The first eight of these character sets (from U.S.A. to Spain I) can
be selected as power-up defaults by DIP switches 2-2 to 2-4.
Enable printing of all character codes
1
Mode
ASCII
Decimal
Hexadecimal
IBM
cESC> ‘Y’ nl n2
27 92 nl n2
1B 5C nl n2
-
Enables printing of all characters in the IBM character set, including
those assigned to character codes which are normally considered __
control codes. This command remains in effect for the next nl + n2
x 256 characters, where nl and n2 are numbers between 0 and 255.
-
During this interval no control functions are executed. If a code with
no assigned character is received, the printer prints a space.
-
44