Filter
Top Products
Select double or quadruple size
Mode
ASCII
Decimal
Hexadecimal
Both <ESC>
“Y n
27 104 n IlB 69 n
Selects the size of subsequent characters as shown below. Extra-
high characters align along the cap-line of normal characters, with
the base line temporarily moving down. Line spacing is temporarily
doubled when n = 1 and quadrupled when n = 2.
n Effect
0 Normal size
1 Double-high, double-wide
2 Quadruple-high, quadruple-wide
Select character size
(Mode 1 ASCII I Decimal
I Hexadecimal I
I
Boti 1 ,,(,, .&(&, ,,s,. ,.),, ,,>,, n i
I
40 40 03 41 41 n 20 20 53 29 29 n
Selects a combination of character height and width according to the
value of n, as below. Does not move the base line.
n Character width
Character height
0 Single width
1 Double width
2 Single width
3 Double width
Single height
Single height
Double height
Double height
Print double-height characters
IMode I ASCII
I Decimal
I Hexadecimal 1 -_
Both <ESC> “w” “1”
27 119 49 1B 77 31
cESC> “w” <l>
27 119 1 1B 77 01
std. <FS> “V” “1”
20 a6 49 1c 56 31
<FS> “v” <l>
20 a6 i ic 56 01
-
Prints subsequent characters at double height without moving the
base line, and without changing the line spacing.
50