Filter
Top Products
Print quadruple-density b-bit graphics
Mode ASCII
1 Decimal Hexadecimal
1
<ESC> “z” nl n2
21 90 nl n2 IB 5A nl n2
Both
ml m2
ml m2 ml m2
Prints bit-image graphics at 240 dots per inch horizontally (maximum
1920 dots wide), skipping every second dot in the horizontal direction.
See < ESC > “K” for other information.
Select graphics mode
Mode ASCII
Decimal Hexadecimal
<ESC > “*” n0 nl
21 42 n0 nl 1B 2A n0 nl
Both
n2 ml m2
n2 ml m2 n2 ml m2
Selects one of seven graphics modes depending on the value of n0 and
prints bit-image graphics in this mode. See < ESC > “K” for information
on nl, n2, ml, m2, . . .
n0 Gravhics mode
0 Normal-density
1 Double-density
2 Double-density, double-speed
3 Quadruple-density
4 CRT graphics, mode I
5 Plotter graphics
6 CRT graphics, mode II
Convert graphics density
(60 dots per inch)
(120 dots per inch)
(240 dots per inch)
(80 dots per inch)
(72 dots per inch)
(90 dots per inch)
1 Mode 1 ASCII I
Decimal
I
Hexadecimal I
IBoth I
< > “?”
n
m 21 63 m IlB3F m I
graphics defined subsequent < > “K”, ESC >
< ESC “Y” or ESC > commands to density mode
by <ESC>
n is “L”,
“Y” “Z”, indicating mode to
converted. m a code < 0 to < > indicating of the
of <ESC>
.
L