Filter
Top Products
Possiblecause
I A~tion
The paper tray cover is not
properly closed.
The release lever is in the
wrong position.
Paper is jamming.
The print gap is not set
correctly.
Close the paper tray cover.
Make sure that the lever is
pushed back if you are
printing on single sheets,
or pulled forward if you are
using fanfold stationery.
Remove all paper from the
printer. Reload paper.
Check the print gap. If
necessary, use the
adjustment lever to set the
print gap. See Setting the
print gap on page 63 of
Chapter 4.
Possiblecause
I Action
A monochrome ribbon Install a color ribbon
cartridge is installed.
A printer that does not
support color has been
selected (either in Windows
or in your application
program).
cartridge.
Select a different printer
driver (see Setting up the
printer in Windows on
page 15 of Chapter 2, and
Printing out your documents
on page 27 of Chapter 3.
Page
92