Filter
Top Products
Set base unit for line spacing
Mom
ASCII
Decimal Hexadecimal
IBM
<E SC> “ [ “ “ \ “
27 91 92
:B 5B 5C
<4> <o> <o>
400 04 00 00
<o> n; n2
o rll rlz 00 nl
n2
Sets the base unit for the line spacing commands,
<ESC> “3” and <ESC> “J”, as shown below:
nl n2
Linespacingunit
o
180
1/ 180
inch
o
216
1/216 inch
1
104
1/360 inch
This command becomes effective only after <ESC> “3” or
<ESC> “J” is received. The default base unit is set to
1/216”.
Set line spacing
MODE
ASCII
Decimal
Hexadecimal
Both
<E SC> “3”
n
27 51 n IB 33 n
Sets the distance the paper advances or reverses in sub-
sequent line feeds to n/180 inch (STD and IBM mode),
n/216 inch or n/360 inch (IBM mode only) according to
the preceding base unit.
The value of n is between O and 255. If n = O, in Stan-
dard mode the line-feed distance is set to O,but in IBM
mode the command is ignored.
Page 124