Filter
Top Products
21
FUNCTION
Sets horizontal tab stops
CODE
<ESC> "D"
n1 n2
...nk <0>
(1B)H (44)H
n1 n2
...nk (00)H
DEFINITION RANGE
1
<
=
n1
<
=
n2
<
=
n3
... <
nk
<
=
(Maximum print columns -1),
1
<
=
k
<
=
16
OUTLINE
Cancels all horizontal tab stops and sets new tab stops within the
character pitch at
n1
,
n2
, etc. You can set up to 16 individual tab
stops (1
<
=
n1
<
=
n2
<
=
n3
...n16
<
=
maximum printing digits). Tab
stops must be set in ascending order. If tab stops are set in an
order which differs fro this, it will end. A <0> code is added as the
ending edge. All tab stops are cleared by inputting <ESC> "D"
<0>. The reference point for the tab positions is left edge of the
paper, regarless of the settings for the left margin. When you
turn ON the power, the horizontal tabs are not set.
FUNCTION
Sets left margin
CODE
<ESC> "l"
n
1B 6C
n
OUTLINE
Sets the non-printable range with the current character pitch up to
the
n
th postion with the left edge as the reference, after printing
the data in the line buffer.
Settings changed partway through a line take effect from the
subsequent line. Changing the character pitch after setting does
not change the left margin. The left margin is the left edge is
when the power is turned ON.
The left margin must be at least 18 dots within the following
values in the left edge of the right margin. Also, if there is less
than one character including the space between characters in the
printable range set for the left and right margins, a "?" will be
printed instead of the character because printing is not possible
there.
The range of
n
is 0
<
=
n
<
=
(right margin -2)
<
=
255. The default
is
n
= 0.