Star Micronics TCP300II Series Printer User Manual


 
59
• Two-byte characters gap dot space setting (JP/GP2312 or GB18030, BIG5, KR)
This command sets the two-byte characters gap dot space. Settings using the ESC sequence
(ESC, D) in the print text data string are enabled only in one electronic statement, but settings
using this command function as default settings in the print character data setting command
41h.
STX, 91h, ‘D’, two-byte character gap dot space setting, ETX, BCC
Two-byte character gap dot space setting parameters
‘0’: Sets the two-byte character gap dot space setting to 0.
‘1’: Sets the two-byte character gap dot space setting to 1.
:
:
‘9’: Sets the two-byte character gap dot space setting to 9.
‘A’: Sets the two-byte character gap dot space setting to 10.
‘B’: Sets the two-byte character gap dot space setting to 11.
‘C’: Sets the two-byte character gap dot space setting to 12.
‘D’: Sets the two-byte character gap dot space setting to 13.
‘E’: Sets the two-byte character gap dot space setting to 14.
‘F’: Sets the two-byte character gap dot space setting to 15.
The ex-factory two-byte character gap dot space setting is 2 dots.
This setting does not function on models other than JP, GB2312 or GB38030, BIG5, or KR.
• Single-byte character gap dot space setting
This command sets the single-byte characters gap dot space. Settings using the ESC
sequence (ESC, d) in the print text data string are enabled only in one electronic statement,
but settings using this command function as default settings in the print character data setting
command 41h.
STX, 91h, ‘d’, single-byte character gap dot space setting, ETX, BCC
Single-byte character gap dot space setting parameters
‘0’: Sets the singe-byte character gap dot space setting to 0.
‘1’: Sets the singe-byte character gap dot space setting to 1.
:
:
‘9’: Sets the singe-byte character gap dot space setting to 9.
‘A’: Sets the singe-byte character gap dot space setting to 10.
‘B’: Sets the singe-byte character gap dot space setting to 11.
‘C’: Sets the singe-byte character gap dot space setting to 12.
‘D’: Sets the singe-byte character gap dot space setting to 13.
‘E’: Sets the singe-byte character gap dot space setting to 14.
‘F’: Sets the singe-byte character gap dot space setting to 15.
The ex-factory singe-byte character gap dot space setting is 2 dots.