Star Micronics TCP300II Series Printer User Manual


 
64
5-5. Recommended Timeout
21 First track read command After card insertion, track 1 read, data request (format
automatic judgment)
6000+α *1
22 Second track read command After card insertion, track 2 read, data request (format
automatic judgment)
6000+α *1
23 Third track read command After card insertion, track 3 read, data request (format
automatic judgment)
6000+α *1
25 First track read command (status with no card) After card presence check, track 1 read, data request
(format automatic judgment)
6000+α *1
26 Second track read command (status with no card) After card presence check, track 2 read, data request
(format automatic judgment)
6000+α *1
27 Third track read command (status with no card) After card presence check, track 3 read, data request
(format automatic judgment)
6000+α *1
29 First track buffer read command
Track 1 read data request, if not read, read operation starts
6000+α *1
2A Second track buffer read command
Track 2 read data request, if not read, read operation starts
6000+α *1
2B Third track buffer read command
Track 3 read data request, if not read, read operation starts
6000+α *1
31
Magnetic stripe write
Idle command
After waiting card insertion, executes magnetic write/read/verify
6000+α *1
32
Magnetic stripe write
Idle command (status with no card)
After card check, executes magnetic write/read/verify 6000+α *1
35 Reverse 7 bit format first track data setting command JISII track 1 write data setting 210BPI 1000
36
Reverse 7 bit format second track data setting command
JISII track 2 write data setting 210BPI 1000
37 Reverse 7 bit format third track data setting command JISII track 3 write data setting 210BPI 1000
38 7 bit format first track data setting command JISII track 1 write data setting 210BPI 1000
39 7 bit format second track data setting command JISII track 2 write data setting 210BPI 1000
3A 7 bit format third track data setting command JISII track 3 write data setting 210BPI 1000
3B First track data setting command ISO track 1 write data setting AN 210BPI 1000
3C Second track data setting command ISO track 2 write data setting BCD 70BPI 1000
3D Third track data setting command ISO track 3 write data setting BCD 210BPI 1000
40 Print expansion buffer clear command Print memory clear 1000
41 Print character data setting command Print data setting (details in separate table) 3000+α
42 Built-in image data 1 expansion command
Expansion to buffer of built-in image data 1
Data settings downloaded from BMP file by separately provided
program.
3000
43 External image data expansion command (line) External image data setting (for each one line) α
44 Two-byte external character font register command
24 x 24 two-byte external character font registration 16 characters/16
x 16 two-byte external character font registration 16 characters
2000
45 Single-byte external character font register command 24 x 12 single-byte external character font registration 16
characters/16 x 8 single-byte external character font
registration 16 characters
1000
46 Erase + print a discharge command Card insertion wait, parameter specification executes
erase and print operations
10000+α
47
Print
discharge command
Card insertion wait, executes additional print without
erasing
10000+α
48
Erase
dischar
g
e command
Erase operation 10000+α
49 Buffer clear command Clear of external image data 2000
4D External image data expansion command (block) External image data setting (block) α
4E Bar code data setting command 1000
50 Card discharge command Card discharge 2000
51 Card backside idle command Card backside idling 2000
52 Cleaning command Magnetic head, thermal head, erase head cleaning 60000
53 Card front side idle command Card frontside idle 2000
54 Card insertion wait status cancel command Card insertion wait status cancel 1000
55 Card pull-out wait status cancel command Card pull-out wait status cancel 1000
58 ROM version request command ROM version request 1000
59 Status request command Detects status of each sensor 1000
5A LED, buzzer control command LED, buzzer control 1000
5B Cleaning button enable/disable command Cleaning button enable/disable 1000
5F Reset command
Sets to initial status, performs initialize operation
3000
90 Communication setting command Communication setting (details in separate table) 1000
91 Various settings command Various settings (details in separate table) 1000
95 Card conveyance count request command
Card reciprocation, path movement operation count
1000
96 Print count request command TPH print operation count 1000
*1 When magnetic read write command timeout value is to retry 3 times
*2 α: Set for operation on host system.
Recommended
Timeout Value Setting
Minimum Value in ms
Units
Function
Command
Name