Filter
Top Products
8
Menu Item Description
Socket Port of HTTP
Setup
If disabled, the IP address, Subnet mask and
Gateway address must be assigned manually.
Socket Port of Serial
I/O
Port Number:
Any number between 1 and 65536,except 80
and 8080 (these have been designated as the
web pages).
Socket Type:
TCP Server - Uses TCP protocol, passively
waits for Client.
TCP Client - Uses TCP protocol, actively
connects to Server.
UDP Client - Uses UDP protocol, exchanges
packets with Server without connection.
Socket Port of Digital
I/O
Spared function for the future expansion.
Currently has no function.
Destination IP
Address/Socket Port
(TCP client and UDP)
The Server IP address under TCP client or
UDP client mode.
Serial I/O Settings
(baud rate, parity,
data bits, stop bits)
Baud Rate: 300 – 115200 bps
Parity Bits: No Parity, Even, Odd
Data Bits: 5, 6, 7, 8
Stop Bit: 1 or 2
Interface of serial I/O
RS-232
Packet mode of serial
input
If packet mode is disabled, the data received
from the serial port will be transmitted
immediately with minimal delay. If packet mode
is enabled, the data will be saved in the buffer
memory first, and transmitted when the entire
packet is received or when the buffer memory
is full.